Pages

Monday, November 15, 2010

Building yet another Picture Frame

This past weekend one set of my parents were here. I got out the mop to start mopping the floors, and decided that they'd MUCH rather me make them a picture frame than have clean floors, so I headed back into the garage. Clean floors are so over-rated anyways.

I've written out instructions before here on how to build a frame, but I thought I'd give an updated tutorial on how to build THESE flat picture frames in a 4x6 size.

Step 1: If you tend to be absent minded like me, write down your measurements. Each mitered edge adds an extra 1.5" to each side, so add a total of 3 inches to each measurement.


Step 2:  Mark off your 1x2 where you're going to cut, and if you have a long piece of wood like I did, enlist the help of a trusty assistant to hold the other piece of the board while you make your cut.


Oh, you don't see my trusty assistant?  Here, let me show you a close up:


Hey...I work with what I've got!

Step 3:  Make your first cut on either side, making sure that the 45 degree angles are opposite of each other.  You can either flip your cut piece over and saw from the same side, or you can rotate your miter saw to 45 degrees opposite of what you just cut.

Step 4:  Take your cut piece of wood and line it up on your existing board.  Mark off the end.  You want your side pieces and top and bottom pieces to be the same exact size.  It's okay if you're a little off measurement wize, so long as your corresponding sides are equal.  It's better to error on the size of too small than too big though.  Too big and your picture won't stay in the frame.


Step 5:  Repeat steps 3 and 4 for the 2nd measurement.

Step 6:  Glue all four pieces together.  Be generous with your glue, but make sure to wipe off the excess that gets between the edges, especially if you're using stain.  Nail the frame around the four corners.  I used 1 1/4" nails.


Step 7:  Admire your edges.


Step 8:  Stain / Paint your frame.  For this frame, I used this stain:


Step 9:  After your frame has finished drying (I left it over night), decoupage pretty paper onto the back of the frame.  I had an old 4x6 picture frame that I was about to toss out, so I took out the glass from the inside of that and glued it to the back of my frame using Quick Grip.  After that, I stapled in a thick piece of scrap paper to the back, making sure to leave room at the top to be able to slide a picture in and out.  That way the picture is interchangeable.


 Here's a few pictures of the front of the finished product.  These frames are relatively easy to make and they make great gifts!  They're a great idea for a homemade Christmas gift.



Yes, I know...the picture is missing.  I was too anxious to get pictures of the frame before my 'rents got here!

Hope everyone had a great weekend!  Stay tuned for more fun stuff coming up this week...'till then, Happy Monday!

If you enjoyed this post, please leave a comment or subscribe to the feed reader to get future posts delivered to your reader.


I'm liking up to the parties on my sidebar, go check out what everyone else is making!

8 comments:

  1. Hi im your newest follower from Monday Blog Hop. Come on by and follow back. Dont forget to leave a comment :).
    Naomi
    www.Na-Miart.blogspot.com

    ReplyDelete
  2. Wow!I like this one even better than the blue. It took the stain so well.

    I'd love it if you would join me for my first ever linky party!

    http://binkiesandbriefcases.blogspot.com/2010/11/introducing-mommy-made-monday.html

    ReplyDelete
  3. Great job... I envy your saw!!!!!! Gotta get me one of those!!! Thanks!

    ReplyDelete
  4. Awesome job! Thanks so much for linking up to gettin' crafty on hump day! :)

    ReplyDelete
  5. Looks great. Thanks for the tute! :)

    ReplyDelete
  6. Thanks for tutorial, looks great:))
    Greetings from Europe, Biljana

    ReplyDelete

Like what you saw? Have a question? Got a suggestion? Leave me some comment lovin!